About Me

My photo
Rajapalayam, Tamil Nadu, India
Mmm..! Well!! About Me More Things To Say.About Me Currently I Am A Student In RMK ENGINEERING COLLEGE Making Out My Knowledge In Computer Science Department. More About Me?? Let You Know Personally. ;-)

Thursday, August 26, 2010

Delete An "undeletable" File !!!

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL where is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.


Or you can try this

Open Notepad.exe

Click File>Save As..>

locate the folder where ur undeletable file is

Choose 'All files' from the file type box

click once on the file u wanna delete so its name appears in the 'filename' box

put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)

click save,

It should ask u to overwrite the existing file, choose yes and u can delete it as normal


Here's a manual way of doing it. I'll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)
5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

3 New Ways!!!

3 New Ways to Make Your Broadband Internet Run Extremely Fast!! ;);)



Broadband is becoming extremely popular around the World, but as many people are now discovering - having a fast broadband connection doesn't always mean that you will get to browse the Internet quickly, or watch movies online, etc. If your Internet connection is running slowly, you may wish to try these 3 new methods to boost its speed. These are extremely simple techniques, but are amazingly effective. Here's what you need to do...
1) Close other programs - Having programs installed on your PC is a great way to expand your computer's functionality, but it can also lead your Internet to run slowly as well. Not many people realize this, but most of the programs available will actually continually try and use your Internet connection to get data. Programs such as Instant Messengers, iTunes & others, will continually get Internet data each time they are running. This is okay, but it means that if you want to browse the Internet or play a game, your connection speed is going to be seriously hampered. To ensure this is not a problem, you need to close down all the other applications that your system has running, making your PC able to focus all its bandwidth on the program you want.
2) Check network usage - You will also need to make sure that any network usage is monitored. The problem many people have is that they will have up to 10 PCs on a home / office network, and have all those PCs trying to use the same Internet connection. To ensure this is not a problem, you need to look at any of the network computers and make sure they are not "hogging" too much bandwidth, by using email programs, online games or instant messengers.
3) Clean out the registry - This is one of the most beneficial ways to boost the speed of your Internet connection, because most computers have serious problems with the 'registry'. The registry is basically a central database which stores vital settings for your computer, and is used constantly by your system & applications. Every time you use your computer, it's constantly reading 100's of settings to allow it to run as smoothly as possible, but unfortunately, many of them will either become damaged or corrupted. This forces your system to take longer to read the files it needs to run, slowing it down. This might seem like a trivial problem, but if your web browser, or online game, is unable to load up quickly because of registry errors, it means that your Internet will appear to be slower, although it might not be. Fortunately, it's very easy to fix this type of problem - by using a "registry cleaner" application. These are software tools you can install on your system, and will fix all the damaged registry settings that are causing your PC to run slower.

Installing windows xp from pendrive!!!

Something works, something doesn't. Something is not supposed to work.
Something is supposed to work, but doesn't. Something should't work, but works.
Something should work, but doesn't;
Something should work from your point of view, but not from mine.
Something is not supposed to work, that's why it doesn't work.
By using these trics , you agree with this statements.

Many time i want to know it (Actually i also want to learn to format my laptop)and write a tutorial about how to install Windows XP using USB flash disk/flash drive.
If you want to install Windows XP, but your notebook (or PC) has no CDROM, you should install Windows XP using USB Flash disk/Flash Drive/Thumb drive...

just follow this guide :



step 1:
Buy an USB Flash Drive (at least 2GB).
When you do this tutorial, please make sure your computer/laptop/PC has a CD-ROM (or DVD).
so, now you have 2 computers, with CD-ROM support and without CD-ROM support

step 2:
Download this software pack



this software pack contains 3 application :

-BootSect.exe (Boot Sector Manipulation Tool)
-PeToUSB (http://GoCoding.Com)
-usb_prep8 (Prepares Windows XP Setup LocalSource for Copy to USB-Drive)

step 3:
Double click Komku-SP-usb.exe


a window will appear... and click Install


step 4:
Insert your USB Flash Drive.
When I made this tutorial, I was using 4GB Transcend USB FlashDrive...




Locate folder C:\Komku\PeToUSB\
double click PeToUSB.exe


a window will appear like this...


Destination Drive : select USB Removable
check on Enable Disk Format
check on Quick Format
check on Enable LBA (FAT 16x)
Drive Label : XP-KOMKU (or whatever you want)
then click Start



Click Yes to continue....



You are about to repartition and format a disk. Disk: .... All existing volumes and data on that disk will be lost. Are You Sure You Want To Continue?"
click Yes



Wait a few seconds.




Click OK, and you can close PeToUSB window.


step 5:
Open Command Prompt ...
Click Start > Run > type cmd > click OK




On Command Prompt window, go to directory C:\Komku\bootsect\
how to do this?
first type this cd\ and press Enter



then type cd komku\bootsect and press Enter



the result...




Don't close Command Prompt window, and go to step 6...

step 6:
on command prompt window, type bootsect /nt52 H:



H: is drive letter for my USB Flash Drive, it may be different with yours...



and press Enter

the result... "Successfully updated filesystem bootcode. Bootcode was succesfully updated on all targeted volumes."



don't close Command Prompt window, and go to step 7...


step 7:
now type this cd.. and press Enter



then type cd usb_prep8 and press Enter



type usb_prep8 again... and pres Enter



step 8:
Your command prompt window will look like this


Press any key to continue...
usb_prep8 welcome screen will appear



Prepares Windows XP LocalSource for Copy to USB-Drive:

0) Change Type of USB-Drive, currently [USB-stick]
1) Change XP Setup Source Path, currently []
2) Change Virtual TempDrive, currently [T:]
3) Change Target USB-Drive Letter, currently []
4) Make New Tempimage with XP LocalSource and Copy to USB-Drive
5) Use Existing Tempimage with XP LocalSource and Copy to USB-Drive
F) Change Log File - Simple OR Extended, currently [Simple]
Q) Quit

Enter your choice:_

now, insert your original Windows XP CD, or Windows XP with sata ahci driver to your CD/DVD ROM
and back to Command Prompt window

type 1 then press Enter...
"Browse For Folder" window will appear, select your CD/DVD drive and click OK



the result... "XP Setup Source Path" changed to G:\ (yours may be different)



now for point 2, if letter T is currently assigned to a drive in your computer, you must change it.... if not, leave it as it is
how to change it?
type 2 and press Enter...



"Enter Available Virtual DriveLetter"
for example you doesn't have drive S
so you type S and press Enter

back to usb_prep8 welcome screen...
now type 3 and press Enter...



"Please give Target USB-Drive Letter e.g type U" Enter Target USB-Drive Letter:
because my Flash drive letter is H



so, type H and press Enter...

after back to usb_prep8 welcome screen...
now type 4 and press Enter to make new temporary image with XP LocalSource and copy it to USB Flash Drive
please wait a few seconds..



"WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE T: WILL BE LOST! Proceed with Format (Y/N)?"
type Y and press Enter
please wait....
when format virtual disk complete, press any key to continue...



please wait... making of LocalSource folder is in progress...




when "Making of LocalSource folder $WIN_NT$.~LS Ready"
Press any key to continue...



"Copy TempDrive Files to USB-Drive in about 15 minutes = Yes OR STOP = End Program = No"
Click Yes, and wait...



Would you like USB-stick to be preferred Boot Drive U: bla... bla..."
Click Yes



Would you like to unmount the Virtual Drive ?"
Click Yes, wait a few seconds, and press any key....
press any key again to close usb_prep8...



Now, your USB Flash Drive is ready.



step 9:
Now, insert your USB Flash Drive/Flash Disk/Thumb Drive to your notebook (e.g Acer Aspire One)
go to BIOS and make USB HDD (or USB ZIP in some other machine) as primary boot device....

then boot form your USB Flash Drive....
and select "TXT Mode Setup Windows XP, Never unplug USB-Drive Until After Logon"



After Hard Disk detected, delete all partition, create single partition... and install Windows XP on that partition...
and wait...



once text mode setup is complete, computer will restart....
this time select "GUI Mode setup Windows XP, Continue Setup + Start XP"



Continue Windows XP setup.... and Done!
Windows XP Installed....



Remember, you can use this tutorial to install Windows XP on all other computers.

We can get through the Open DNS and can cheat admini !!!

 
Try this http://wehateschool.info/
It Really Works....
 

How to Make Your PDF Files Speak to You!!


This is an Interesting Trick in Adobe Reader. This works in Adobe Reader 7.0 through the latest 9.3.


1. First of all Install Adobe Reader , if you haven’t already.

2. Ok So first you go to View>Read out Loud> Activate Read Out Loud.



3. After you have done that just do this.



Now it will read it to you out loud in the Default Microsoft Sam voice.
Hope This Post Helps You.

Forget your Password Today… Set a New One !! :)

We live in a world of Digital Darkness. A Bright Flash Ray of Internet is making us Blind. One who does not know about Facebook and Orkut is a Fool, however one who put his personal and professional information on these so called Social Vitamins of Digital World is a Super Fool, giving rights to others to enter his resources and steal everything away.
One should follow a Password Policy in order to make our Personal and Professional resources secure.

1: Passphrase should be of atleast 8 length

2: One should include Characters(A-Z), Numbers(0-9) and Special Characters(! @ # $ % etc) in the Passphrase

3: Don’t be lazy to make your Web Browsers remember your password. Put your credentials manually everytime you login to your profiles.

4: Just try to remember the Account Security Question you were asked to configure at the time of Signing Up for the Account, I am sure you don’t. Always keep a track of it. Keep on checking it.

5: Keep changing your password on a Weekly or Monthly basis.

6: Do your Spouse or Best Friend know your password. I think Yes. Never share your Account Credentials with anyone, not even with your dearest one.

7: In a hurry, just got an important Email. Avoid using other’s computer to check your Emails. There might be software installed in the computer, keeping an eye on your personal information.
More than 50% of the Email IDs are already Hacked and Account holders do not know anything about it. Make sure yours in not one of them.

An Interesting Trick to Hide the Data in Notepad...

Hello Friends,

There is “An Interesting Trick to Hide the Data in Notepad.”
Here is a small trick to hide text inside your windows default text editor i.e. Notepad using command prompt, but this trick works only on NTFS file system.

Steps to hide text in a Notepad

1. Open your command prompt Start–>Run and Type cmd

2. Type cd.. to move to C:\> drive or Type cd desktop to move to your desktop.

3. Type the below code in your command prompt
notepad filename.txt: hidden

4. Write some data and save (Ctrl+s) the file.

5. Browse to the file location and Open filename.txt you cannot see any data in the file.

6. To retrieve the hidden data open command prompt and type the same command.

Notepad filename.txt:hidden


I hope This Post Helps. Please Pass Comments.

How to Crack Linux Password !

If you’ve ever got stuck on the Login screen of your Linux system, as you don’t know the System password, don’t worry now. Its very easy to crack the password in Linux system.
All it takes is adjusting the boot parameters slightly and typing a command or two. Just follow the below given commands, and the work would be done.
  1. Reboot your computer, and then as soon as you see the GRUB Loading screen, make sure to hit the ESC key so that you can get to the menu.

  2. Linux Grub
  3. Now you have two options:
Root Shell Method
  1. If you have the option, you can choose the “recovery mode” item on the menu, usually found right below your default kernel option.
  2. Then choose “Drop to root shell prompt” from this menu (This is called the Single User Mode).
  3. This should give you a root shell prompt.
Alternate Root Shell Method

If you don’t have the recovery mode option, this is the alternate way to manually edit the grub options to allow for a root shell.
  1. First you’ll have to make sure to choose the regular boot kernel that you use (typically just the default one), and then use the “e” key to choose to edit that boot option.

  2. Now just hit the down arrow key over to the “kernel” option, and then use the “e” key to switch to edit mode for the kernel option.

  3. Grub Details
  4. Now in the next screen that you see, you have to remove the “ro quiet splash” part with the backspace key, and then add this onto the end:
    rw init=/bin/bash
    (On some versions of Linux, you might have other shells as the default shell. So you have to type the above line accordingly. But most Linux versions have the “bash” shell as the default shell.)
  5. Once you hit enter after adjusting the kernel line, you’ll need to use the B key to choose to boot with that option.
  6. At this point the system should boot up very quickly to a command prompt.
You are now at the Root Shell Prompt (also called the Single User Mode)

Now Reset the Password
  1. Once you are the Root Shell Prompt, by following any of the above given method, you can use following command to reset the password of any user account:
    passwd username
  2. After the command is successful, type the following command to make sure the changes are written to the hard disk, before you reboot the computer:
    sync
  3. Now reboot the computer using the command:
    reboot -f
Once the computer restarts, you shall be able to login from the account, for which you had changed the password.